Results?
my.raceresult.com
NL

race|result Decoder

The decoder receives the signals from the transponders, calculates the exact finish time and provides the data to the scoring software like race|result 11 in real time. The system runs independently from your computer and from power supply.

Besides it offers the follow features: internal battery which lasts 8 hours, GPS receiver for time synchronization, 2 Ethernet ports with internal switch, detection indication via LED and/or beeper, connector for external battery/cigarette lighter of your car, integrated 4G/LTE modem for automatic upload, feature port to connect accessories like light barrier, USB connector to save the data on a USB stick.

Curious to learn more about the 5000S Series? Click on the circles!
 

GPS Module
Your decoder can automatically connect to GPS after booting and get the precise GPS time. This ensures highest precision, especially when using several timing points.

Display
The display has an integrated backlight and is easy to read, both at night and in direct sunlight. More Information

Network Interface
Connect your system with the race|result 11 software, update the firmware and adjust settings from your browser. Includes an internal switch. More Information

External LTE Antenna Connector
You can use an external LTE Antenna (sold separately) to improve the connectivity in areas with poor cellular coverage. The decoder LED indicates an active mobile connection. More Information

Battery
The decoder has an internal lead acid battery of 15Ah capacity which will last about 8 hours with the passive antenna or 24 hours with the active loop. It can be charged while running. More Information

Keypad
Turn your decoder on and off, navigate through the decoder menue and start timing. LEDs indicate when timing mode is active, the battery is charged and external power is available. More Information

USB port
Connect a USB stick to copy all detection files. This is a handy option when your decoder cannot be moved or accessed through the internet. Newer decoders also support WiFi dongle connection. More Information

Beeper
Blinks and gives an acoustic signal on each detection. You can also connect external speakers or headphones with 3.5mm jack. The internal beeper will then be turned off. More Information

Cable way
To keep your decoder dry in rainy weather, you should close the lid and lead cables out here. Leave the lid slightly open in hot and dry weather. More Information

Feature Port
Plug in your Active Extension to run the decoder in active timing mode. You can also connect other devices like start markers or light barriers. More Information

12V Battery Connector
Connect a larger battery or a car (via the cigarette lighter) for longer times without another power supply. Use the 12V Battery Booster (sold separately) to first fully discharge external sources, before internal battery is used. More Information

4G Module/ SIM Card Slot
Insert your own SIM card to connect the decoder to a mobile network of your choice. The integrated 4G module then pushes all detections to the online storage. This is the easiest way to get live data from remote split points. More Information

Power Supply
110-240V AC, 50/60Hz. The decoder comes with a power cable matching your country's sockets. More Information

Reader
The integrated 8-port "Zebra FX9600 RFID Reader" was customized for race|result to fit the special needs of a timing system. It unfolds all its power in combination with our foldable ground antenna and race|result passive transponders.

Repair/Upgrade
The decoder can be opened to upgrade the hardware, replace the battery or repair components. Always closely follow our instructions if you open the decoder and note that you will lose any further warranty.

Videos on the race|result Decoder