Timing solution for
MotoCross

The active solution is perfect for MotoCross. Thanks to the detection at a height of up to 2.5 m, the ActivePro V3 Transponder is ideally suited, even with a deeply buried loop. The Active Loop Box can also be used to easily determine sector times, for example if you have sections that are more focused on bike handling and speed.

Event Reference

XROSS Hard Enduro Rally

Zlatibor, Serbia



The race is part of the FIM Hard Enduro World Championship and is considered the toughest Enduro race in the Balkans. The main event spans three days and involves off-road rally-style racing through challenging terrain. The timing was managed by the organizer themselves. An active system was set up at the start/ finish line, active transponders were mounted on the front fork of the motorcycles. Loop Boxes were used to collect data from the service zone. For checkpoints, the Track Box Active was used. This device can easily be set up in remote and difficult-to-reach locations and does not need to be looked after by helpers. Using the RACE RESULT 12 software, live result boards were generated. In the service zone, each rider received their individual countdown to continue racing on a tablet, also generated by RACE RESULT 12 software.

Setup

We recommend burying the loop in conduit under the track. This protects the loop should the ruts on the course get deeper. Make sure that the loop is not laid out immediately after a jump, as heights of over 2.5 m can here be reached quickly, which means that the transponders could no longer be detected.
The best way for drivers to attach the ActivePro V3 transponder to the front fork is to use the Active Chip Holder. However, make sure to leave as much distance as possible to other electronics.
Connect your Ubidium timing system to a laptop via LAN or WiFi to get all finish times in real time. In RACE RESULT 12 software, use the "Lap race" template. This template is the perfect place to start and may already have everything you need.

Equipment

Ubidium

The cutting-edge timing system designed for superior performance and versatility. Boasts exceptional weatherproofing, lightweight design, and up to 32 hours battery life. Data is transmitted in real-time through multiple options, including SIM, Ethernet, POE, or USB-C connections.

Optional:
Loop Box

Easy and cost-effective way to collect splits times. At nearby timing points detections are repeated wirelessly to the main system. In case of remote timing points, the ActivePro Transponder saves the passing time and then transmits them when arriving at the finish. Integrated battery for 12-20 h.

ActivePro V3 Transponder

prd_short_descr.v3pro

Active Transponder Holder

prd_short_descr.transponderholder

RACE RESULT 12 Software

The complete software for timing and managing of any kind of sports event. The intuitive user interface allows you to setup events without complicated formulas or calculations. Featuring registration, event timing, scoring, live results and various output options in one browser-based solution.

Pricing for the Complete Solution

rent buy  
RACE RESULT Ubidium n.a. $ 3,490 per system
RACE RESULT System 5000s, Active Extension $ 369 n.a. per system
Optional: Active Loop Box V2 $ 179 $ 2,390 per piece
RACE RESULT ActivePro V3 Transponder n.a. $ 44 - $ 72.50 per transponder
RACE RESULT ActivePro V2 Transponder $ 3.50 - $ 4.50 n.a. per transponder
Active Transponder Holder   $ 3.50 per piece
Software RACE RESULT 12
including online registration
  $ 0.05 - $ 0.30 per participant
All prices plus VAT / tax if applicable
Cookies help us deliver our services.
In addition to technically necessary cookies, we use third-party cookies to analyze and optimize our service and to display videos.

Learn more

...may we help?

Get in touch quickly and easily now.

Close

Contact us!


I have read the data privacy terms.