The Ubidium cables are used to carry both power and data, you should not attempt to repair these cables as improper repairs may cause damage to both the system and antenna elements. 

Connector Cable

The connector cable is used to connect the Ubidium Ground Antenna to the system.

The main connector is plugged in to the Expansion Port of the Ubidium System and then splits in to two individual cables which are used to connect to the first and second Antenna Elements.

Reader Cables

The reader cables are used to connect additional Antenna Elements to the Ground Antenna. The cable ends fit in to the coupling joint or should be stored in the parking position of the base when not in use.

Coupling Joint

The coupling joint is used to connect the cables to the Antenna Element. The central screw should be fully tightened using a flat-head screwdriver in the slot to ensure proper connection.