Passing Format

Standard format:
[TranspCode:string];[WakeupCounter:4];[TimeStamp:8];[Hits:2];[RSSI:2];[Battery:2];[Temperature:2];[LoopOnly:1];[LoopId:1];[Channel:1];[InternalActiveData:2];[InternalData:1]=[CheckSum]

FW2.6 format after setting <CONFSET;B3;1>

[TranspCode:string];[WakeupCounter:4];[TimeStamp:10];[Hits:2];[RSSI:2];[Battery:2];[Temperature:+2];[LoopOnly:1];[LoopId:1];[Channel:1];[InternalActiveData:2];[InternalData:1];[ExtendedPassingFlags:2];[BackupChannel:1];[ExtraCode:x]=[CheckSum]

[TranspCode]

The code of the transponder

[WakeupCounter]

Overall wakeup counter of the transponder (new transponders start at 10000)

[TimeStamp]

Time stamp of the detection in number of ticks

Standard Format: 32 Bit - 256th seconds

FW 2.6 Format: 40 Bit - 2048th seconds

[Hits]

Number of times the tag was detected

[RSSI]

RSSI value, see full description of RSSI here

[Battery]

Battery level in volts - (00 - ff) => (0 - 25.5), eg. 1f = 3.0V

[Temperature]

Temperature in degrees Celsius - (00 - ff) => (0 - 255), eg. 1a = 26°C

FW 2.6: Signed Value from -20°C...49°C (HEX: -14...+31)

[LoopOnly]

1 if this detection was generated in Store Mode

[LoopID]

Loop ID, (0 - f) => (1 - 8)

[Channel]

Channel ID (0 - f) => (1 - 8)

[InternalActiveData]

Data transmission details of an Active Transponder. One byte. Lowest three bits: no channel access counter (number of times, the passing could not be transmitted because the transponder could not access the channel). Next three bits: no ACK counter (number of times the passing was transmitted, but no acknowledgement was received. Seventh bit: 1, if this passing could not be transmitted at all in a previous attempt (="stored passing", old passing), 0 otherwise. Highest bit: 1, if the transponder woke up from deep sleep, 0 otherwise. Hint: You can check if a passing is a stored passing using
[InternalData] & 0x40 == 0x40 (the seventh bit is set).

8	7	6	5	4	3	2	1
DS	ST	No ACK			Channel busy

[InternalData]

This field is only used for internal purposes.

[ExtendedPassingFlags]

Reserved for future use

[BackupChannel]

Indicates if a passing was received on primary or secondary 2.4Ghz channel

[ExtraCode]

Extra Code as programmed into Transponder. This is optional and only reported if transponder Extra Code is set.

[CheckSum]

This is a simple 8bit-rollover check sum over all characters in this line up to and exluding the ";" before this checksum. Only applys if confset 0xB1 was set.

Example Call

Example (standard format)

← PASSINGGET;1\n
→ PASSINGGET;00\n
→ 00000001;01\n
→ IKNWZ06;a153;093a9eb4;fe;71;1d;15;0;1;7;00;0\n
→ \n

Example (2x passings, additional FW2.6 data fields after <CONFSET;B3;1> with one transponder reporting an Extra-Code)

← PASSINGGET;1\n
→ PASSINGGET;00\n
→ 00000001;02\n
→ IKNWZ06;a153;093a9eb470;fe;71;1d;+15;0;1;7;00;0;00;1\n
→ ZILAL95;9087;093ab54213;fe;71;1d;+1a;0;1;7;00;0;00;0;A-1000\n
→ \n

Example (8x passings, additional FW2.6 data fields after setting <CONFSET;B3;1> and checksum after setting <CONFSET;B1;1>)

← PASSINGGET;1\n
→ PASSINGGET;00=90\n
→ 00000001;08=24\n
→ IKNWZ06;a153;093a9eb470;fe;71;1d;+15;0;1;7;00;0;00;1=85\n
→ ZILAL95;9087;093ab54210;fe;71;1d;+1a;0;1;7;00;0;00;0=42\n
→ ZILAL95;908e;093ad85370;fe;71;1d;+1a;0;1;7;00;0;00;0=7D\n
→ ZILAL95;9093;093af16d30;fe;71;1d;+1a;0;1;7;00;0;00;0=75\n
→ ZILAL95;90a9;093b5fe320;fe;71;1d;+1a;0;1;7;00;0;00;0=A5\n
→ ZILAL95;90b6;093ba10a00;fe;71;1d;+1a;0;1;7;00;0;00;0=91\n
→ ZILAL95;9144;093e6a2150;fe;71;1d;+1a;0;1;7;00;0;00;0=41\n
→ ZILAL95;915c;093ee28f50;fe;71;1d;+1a;0;1;7;00;0;00;0=AC\n
→ =00\n

Impulse Marker

Markers generated on impulse input at the headphone jack of LoopBoxes and USBTimingBoxes always have a TransponderCode of 00000127 (FW 2.6 and up - previously _____127) no matter where they were created. You can use the LoopId and Channel to filter for a specific loop box. WakeupCounter counter is started at loopID * 1000 and incremented with every impulse.

→ 00000127;1f40;01521ab6;00;00;14;7b;0;7;0;00;0\n

Cookie	LastUser
Description	Stores the customer number from the last login through this browser. Used to prefill the user input in the login area.

Cookie	Cookieconsent
Description	Used to check if the cookie banner was shown to you in the last 35 days. Also stores your specific cookie banner selections.

Cookie	contactform_flag
Description	Checks if the red box with the contact form hint has already been presented in this browser session.checks if the red box with the contactform hint has already been presented in this browser session

Cookie	PHPSESSID
Description	This key is necessary to anonymously identify the current user session by our system. Essential for shopping cart, order process, customer account, etc.This key is necessary to anonoumously identify the current user session by our system. Essential for shopping cart, order process, customer account etc.

Cookie	Vimeo
Description	We use the video platform Vimeo to host videos and embed them into our website. When clicking on the video, Vimeo may set cookies in the browser.

Cookie	analytics_storage
Description	Checks if Google Analytics cookies can be stored to analyze user behavior on the website and understand how visitors interact with our content. By consenting, you help us improve the user experience.

Cookie	ad_storage
Description	Checks if advertising cookies can be stored, which are used for personalized advertising and retargeting.

Cookie	ad_personalization
Description	Controls whether ads are personalized based on the user's behavior and interests to show tailored ads.

Cookie	ad_user_data
Description	Controls whether the user's personal data can be processed for advertising purposes, such as information about age, gender, or interests.

Example Call

Contact us!