<PassingNo>

Passings record number, starting at 1 for the first passing.

<Bib/TranspCode>

Bib number of the transponder. (Since protocol version 1.2: Or transponder code in case of multi use tags or Active transponders.)

<Date>

Format: yyyy-MM-dd
If GPS is used, date of the detection, otherwise 0000-00-00 or 0000-00-01 after 24 hours and so on.

1.0

<Time>

Time of the detection, format: hh:mm:ss.kkk

1.0

<EventID>

ID of the bib set. The combination of <Bib> and <EventID> is unique for all RACE RESULT Bib Transponders ever produced.
In case of multi use tags <EventID> is 0 or empty.

1.0

<Hits>

Number of times the tag was detected.

1.0

<MaxRSSI>

Maximum RSSI value found while determining <Time>.
(Maximum value for passive detection is 25-1 = 31; for RSSI of active detection see here).

1.1

[<InternalData>]

This field is only used for internal purposes and is optional.

1.1

<IsActive>

1 if this passing is from an active transponder

1.4

[<Channel>]

Channel ID (1..8)

1.4

[<LoopID>]

Loop ID (1..8)

1.4

[<LoopOnly>]

1, if this detection was generated in Store Mode.

1.4

[<WakeupCounter>]

Overall wakeup counter of the transponder (new transponders start at 10000).

1.4

[<Battery>]

Battery level in Volts.

1.4

[<Temperature>]

Temperature in degrees Celsius.   

1.4

[<InternalActiveData>]

Data transmission details. One byte. Lowest three bits: channel busy counter (number of times, the passing could not be transmitted because the transponder could not access the channel). Next three bits: no ACK counter (number of times the passing was transmitted, but no acknowledgement was received.) Seventh bit: 1, if this passing could not be transmitted at all in a previous attempt (="stored passing", old passing), 0 otherwise. Highest bit: 1, if the transponder woke up from deep sleep because of the passing, 0 otherwise.

1.4

<BoxName>

Name of the decoder. Defaults to the Device ID.

1.6

<FileNumber>