Zabudnuté heslo? Registrácia
Combining Multiple Systems (5000 Decoder, Ubidium, Track Box Passive)

When more than one timing system is used at the same location, for example a main and a backup line, the detection fields of the systems can interfere with each other. A transponder cannot communicate with two readers at the same time, so overlapping detection fields reduce the read rates of both systems.

Each system type has its own minimum distance to other systems. When combining two different system types, always use the greater of the two distances.

Combination Minimum distance
Decoder + Ubidium 5 m / 16 ft
Track Box Passive + Decoder 20 m / 66 ft
Track Box Passive + Ubidium 20 m / 66 ft

Decoder and Ubidium

A Decoder with a Foldable Ground Antenna needs at least 3 m / 10 ft to the next detection line. An Ubidium Ground Antenna needs at least 5 m / 16 ft. The greater distance applies, so keep the two antennas at least 5 m / 16 ft apart.

A Decoder Foldable Ground Antenna and an Ubidium Ground Antenna placed one after the other across the course, at least 5 m / 16 ft apart.

Track Box Passive and Other Systems

The Track Box Passive has a much larger read zone than a ground antenna. Keep at least 20 m / 66 ft between a Track Box and any other timing system, including a Decoder with a ground antenna or high-gain antenna, and an Ubidium. Because 20 m is the greatest limitation, it always applies when a Track Box is combined with another system type.

COURSE DIRECTION read zone min. 20 m / 66 ft Track Box Passive Decoder or Ubidium Ground or high-gain antenna Not to scale

 

A pair of Track Boxes on each side of the course and a Decoder or Ubidium ground antenna, at least 20 m / 66 ft apart.

 

Extending One Line Across a Wider Course

 

For a wider detection line, only use one system type. Never join two different system types in one line. Their detection fields overlap where the antennas meet, and there is no method to separate them.

 

How a line is extended depends on the system type:

 

 

Two Decoder ground antennas joined with a dummy element in the middle is correct. A Decoder ground antenna joined to an Ubidium Ground Antenna is incorrect because the detection fields overlap.

 

The main and backup lines can use different system types, as long as each line uses only one system type and the lines are spaced using the distances above.

 

×

Máte otázku?

Náš tím vám rád osobne poradí.

╳

Kontaktuj nás!

Tím v RACE RESULT rád posúdi vaše individuálne potreby, vyrieši existujúce problémy a zodpovie všetky vaše otázky. Neváhajte nás kontaktovať prostredníctvom poskytnutého formulára.

Ak máte otázku podpory, pridajte svoje ID udalosti!

Prečítal som si ochrana dát.