Zabudnuté heslo? Registrácia
Button & LED Blink Codes

       

less than 20s -> Firmware upgrade in progress

more than 20s -> Fatal Hardware ERROR

       

SIM Card error

 ...........................................................................................

no GPS, Network OK

 ......   ..........................................................

no GPS, no network

....................    ..........................................................

GPS OK, but no network

 ...................................................   

no GPS, but network OK

& Receiving track pings!

 ......   ................

no GPS, no network

Receiving track pings!

 ..........................................................................................

GPS and network OK

 ...................................................     

GPS and network OK

receiving track pings!


Charging:

 Battery full

 Battery not yet full

Note: the Track Boxes are always on when charging.

Button:              

Press button to switch on.

Keep the button pressed for 1 second to turn off. If the Track Boxes are stacked, or very close to each other, they will send a shut down command via 2.4GHz to shut down all boxes in the stack.

You can reset the Track Box by pressing the button for 10 seconds.

If the Track Box is locked via Tracking Box Configuration Rules, the LED will not blink at all and the button wont turn off the box. You can still reset the box by pressing the button for 10 seconds.               

×

Máte otázku?

Náš tím vám rád osobne poradí.

Kontaktuj nás!

Tím v RACE RESULT rád posúdi vaše individuálne potreby, vyrieši existujúce problémy a zodpovie všetky vaše otázky. Neváhajte nás kontaktovať prostredníctvom poskytnutého formulára.

Ak máte otázku podpory, pridajte svoje ID udalosti!

Prečítal som si ochrana dát.