The decoder box has the following connectors on the front panel:
|
Power |
Power supply, 110-240V AC, 50/60Hz. |
|
External Battery |
Using the enclosed cable, the decoder can be connected to an external battery or a cigarette lighter of a car (see External Battery Port). |
|
Ethernet |
The detections can be read through a network connection (see Ethernet Connection). |
|
USB |
Using the USB port, the detections can be saved on a USB stick (see USB Connection). |
|
Audio |
The decoder contains an internal beeper, which will give an acoustic signal on each detection. Alternatively, you can connect an external speaker or headphones. The internal beeper will then be turned off. |
|
Feature Port |
The Feature Port serves to connect additional accessories, including the Active Loop (see Feature Port). |
Additionally, the decoder box has 8 antenna connectors for the passive UHF antenna on the back (see Passive Antenna Setup for more details on setup).
