Place the decoder next to the antenna/Active Extension and connect all 8 coaxial cables to the 8 connecting ports on the back of the decoder/connect the Active Extension to the Feature Port of the decoder. With the passive system, every cable can be connected to any plug; you do not have to follow a certain order. Avoid putting other cables (e.g. electricity) over or under the coaxial cables.
Besides the connections for the antenna, the decoder has the following ports:
|
Power: |
The rechargeable internal battery of the decoder lasts for max. 6-8 hours and serves primarily as a backup function in case of power outages. The decoder should always be connected over a cable supporting 110-240V / 50/60Hz. As an alternative, you can also use the included cable to connect the decoder to an external battery or a cigarette lighter of a car. |
|
Data: |
The detections can be read through an Ethernet connection. |
|
Audio: |
The decoder contains an internal beeper, which will give an acoustic signal for every detection. Alternatively, you can connect an external speaker or headphones. The internal beeper will then be deactivated. |
|
|
When operating the system during hot temperatures (>25°C / 80°F) and located in direct sun light, the lid should be opened. Otherwise, the system may perform a temperature triggered emergency shutdown. |
|
|
During rain, the lid of the decoder has to be closed and locked. Therefore, all cables have to be led through the gap between box and lid on the side. |
