Released: 2018-11-26

NEW: Active: Tracking start and tracking stop modes are displayed in the web interface.
NEW: Passive: Store antenna number which meassured the highest RSSI value along with passing.
MOD: General: If you had previously issues and couldn't upgrade the Firmware of a decoder this upgrade might fix it.
MOD: General: Removed "test only" hint from TCP upload configuration.
MOD: General: Enhanced boot time in some circumstances.
MOD: General: Improved upload handling when customer number changes.
MOD: General: When in standby, check connectivity less often.
FIX: Active: Possible issues when calculating the beacon checksum.
FIX: General: Decoders do not show up in the timing module automatically when they should.
FIX: General: Cancelling diagnostics upload can take very long. Progress when uploading a second time is not correctly shown.
FIX: General: Mobile reconnect count and RSSI are swapped in traditional upload.
FIX: General: Entering 000.000.000.000 as an IP prevents that option from being changed again.
FIX: General: USB sometimes displays 0 instead of n/a when no USB drive is connected
FIX: General: Reverting to factory defaults did not always work.
FIX: General: Keys in GPS time menu respond very slowly.
FIX: General: Pressing START before the decoder finished booting prevents a successful boot.
FIX: General: Subnet is always /24 when using DHCP.
FIX: General: Hint to upload diagnostics is not cleared after uploading diagonstics via web interface.
FIX: General: emergency.txt file might get cached in the browser.
FIX: General: Custom 2G/3G settings cannot be cleared completely.
FIX: General: Mobile reconnect in AUTO APN mode could take very long.
NEW: Interface: GETFILEINFO call.
NEW: Interface: Added antenna w. highest RSSI value and decoder ID to passings record.