How should I stick the transponders on the bibs?

To work with RACE RESULT antennas the transponders must be stuck vertical and there should be at least 10 cm between two transponders

What is the difference between Transponders with foam spacer and Simple Transponders?

Bib transponders are made for running events or other events where the bib is worn close to the body. The foam spacer on the bib is there to provide some distance between the transponder and the human body, as the human body is made of about 70 % water, which absorbs the radio frequencies used in timing systems.

The simple tags are for applications away from the human body, i.e. on bike race numbers.

What is the size of the Transponder?

Transponder with foam: 108 x 27 mm

Simple Transponder without foam: 105 x 25 mm

Can I request certain letter codes for the "1000 RACE RESULT A-Z Bib Transponders"?

The "A-Z Bib Transponders" come on rolls of 1000 transponders. These do not contain the bib number, but instead a chip code, e.g. P-1 to P-1000.

You will need a chip file in your software!

If you need a certain prefix, please leave a comment in the order, otherwise you will receive a letter prefix at random. The prefix always consists of one letter only.

How do "1000 RACE RESULT Raw-Transponder" work, and how are they used?

Each transponder contains a unique code. Programming with the final race number can only be done using the Chip2Go.