Forgot your password? Register
General Result Settings

Subtract start time (T0) - the start time (T0) will be subtracted from the passing time and the result (race time) will then be stored in the results. Only activate this if your timing system is using GPS Time / Time of Day. 

Ignore chip reads before start time (T0): This option only relevant for legacy events which do not use Timing Points set to Raw Data Mode or for advanced raw data rules where a minimum time is defined. All reads before the start (T0) will be ignored.

The following settings are applied accordingly to each specific Contest. 

Minimum Lap Time: Minimum Lap Time defines a minimum time to be used for laps. This also applies for the Start rule to define the maximum Start time and when Number of Laps is 1, defines the minimum time for the Finish rule.

Number of Laps: Defines the number of laps expected for the Contest, this value will be used for the Finish rule. Also used for the field [Contest.Laps] and if greater than 0 will enable the use of Raw Data Lap Rules.

×

Do you have a question?

Our team is happy to advise you personally.

Contact us!

The team at RACE RESULT will be happy to assess your individual needs, troubleshoot existing issues and answer any questions that you might have. Feel free to reach out through the provided form now.

If you have a support question, please add your event ID!

I have read the data privacy terms.