Please perform the following actions to complete the hardware setup:

1. Place the USB Timing Box next to the plugs of the loop cable.
   
2. Plug the loop cable into the red circular ports on the USB Timing Box. Either cable end can be placed into either port. The loop cable is used to activate the transponder.
3. Screw in the black antenna into the USB Timing Box. The antenna is used to receive the signal back from the transponder.
4. Plug in the provided USB cable into the USB Timing Box and connect it with your computer.
   

The USB Timing Box will automatically turn on.

 Using other USB cables with increased length or poor quality may cause errors.

 The transponders need direct line of sight to the 2.4 GHz antenna to transmit detections. Make sure there are no obstacles between the finish line and the USB Timing Box, or use a Range Extender.