Passwort vergessen? Registrieren
Client Mode

Valid <SETTING>s are:

HOST;<HostNum>

Set/get host entry <HostNum> (1 -> 10).

Set <PARAMETERS> (separated by ;)

<Configure>

1, if the host should be configured, 0 if the host should be marked as not configured

<Host>

Name or IP of host to connect to

<Port>

Port to connect to

<KeepAlive>

Time in seconds, after the decoder reestablishes the connection, if no command was received

<AutoStart>

Automatically establish connection after boot

Set response

SETCONFIG;CLIENTMODE;HOST;<HostNum>;<Configure>;<Host>;<Port>;<KeepAlive>;<AutoStart>    

Get response

GETCONFIG;CLIENTMODE;HOST;<HostNum>;<Configure>;<Host>;<Port>;<KeepAlive>;<AutoStart>;<IsConnected>

Where <IsConnected> is 1, if the connection is currently established, 0 otherwise.

USEUPLOADGPRSSETTINGS

Specifies whether the decoder should use the upload connection settings when connecting to a host. This can be used to use establish a GPRS connection.

Set <PARAMETERS>

<UseSettings>

1, if upload settings should be used, 0 (default) otherwise

Set response

SETCONFIG;CLIENTMODE;USEUPLOADGPRSSETTINGS;<UseSettings>

Get response

GETCONFIG;CLIENTMODE;USEUPLOADGPRSSETTINGS;<UseSettings>
×

Haben Sie eine Frage?

Unser Team berät Sie gern persönlich.

Schreiben Sie uns!

Das Team von RACE RESULT berät Sie gerne zu Ihren individuellen Bedürfnissen, behebt bestehende Probleme und beantwortet Ihre Fragen. Kontaktieren Sie uns jetzt über das Formular.

Wenn Sie eine Support-Frage haben, fügen Sie bitte Ihre Event-ID hinzu!

Ich habe die Datenschutzbestimmungen gelesen.