Los transpondedores pasivos de RACE RESULT están encriptados y especialmente codificados para trabajar con sistemas RACE RESULT. La codificación con un número de dorsal único es posible con números de hasta 7 cifras; por lo tanto, el número máximo permitido es 9.999.999.
Para otros sistemas, será necesario generar un archivo de chip utilizando el código único del transpondedor, no podemos producir transpondedores con códigos de chip específicos para ningún sistema de terceros.
Bib number with transponder
What's the difference between single and duo bib numbers?
Single bib numbers come with only one transponder on them, duo come with a pair of transponders.
Generally, we recommend having a redundancy in your main timing setup, so either one system with duo bib numbers, or two systems with single bib numbers.
Bib numbers with transponder in 230 x 200 mm or custom format?
A5 is not big enough? You wish to get larger bib numbers?
In this case, we offer bib numbers with the format 230 x 200 mm.
More information about the configuration in the online shop can be found here.
Please note that the maximum dimensions are 210 x 297 mm. Should you need an even larger format, please contact us via shop@raceresult.com.
Transponders on Roll (for self-adhesive)
How should I stick the transponders on the bibs?
To work with RACE RESULT antennas the transponders must be stuck vertical and there should be at least 10 cm between two transponders
What is the difference between Transponders with foam spacer and Simple Transponders?
Bib transponders are made for running events or other events where the bib is worn close to the body. The foam spacer on the bib is there to provide some distance between the transponder and the human body, as the human body is made of about 70 % water, which absorbs the radio frequencies used in timing systems.
The simple tags are for applications away from the human body, i.e. on bike race numbers.
What is the size of the Transponder?
Transponder with foam: 108 x 27 mm
Simple Transponder without foam: 105 x 25 mm
Can I request certain letter codes for the "1000 RACE RESULT A-Z Bib Transponders"?
The "A-Z Bib Transponders" come on rolls of 1000 transponders. These do not contain the bib number, but instead a chip code, e.g. P-1 to P-1000.
You will need a chip file in your software!
If you need a certain prefix, please leave a comment in the order, otherwise you will receive a letter prefix at random. The prefix always consists of one letter only.
Recycling of Transponders
According to the ElektroG (German Electronics Law), UHF-Transponders are defined as electronics.
To save resources these should no longer be disposed of in the regular household trash. You can deposit your used transponders at any electronics recycle collection center. These are usually located at waste management and recycling centers as well as big electronics stores, where all electronics will be recycled and converted for reuse.
Please follow your country's local government laws for recycling and disposal of all electronics.