![]() |
IT |
Un numero in rapida crescita di eventi d'élite in tutto il mondo ha fiducia nel sistema attivo RACE RESULT. Combina alta precisione e affidabilità con caratteristiche uniche come il tracciamento e la modalità di archiviazione.
La combinazione senza eguali di Decoder e Active Extension garantisce un tasso di rilevamento del 100%. Un semplice cavo loop viene utilizzato per rilevare i transponder. Può essere nastrato sul traguardo o interrato.
Precisione: 0.2 s
Velocità max.: 75 km/h
Attivazione antenna 1D
Autonomia batteria: 7 anni garantiti,
12 anni previsti *No tracciamento
Alta precisione: 0.01s
Velocità max.: 150 km/h
Attivazione antenna 3D
Autonomia batteria: 5 anni garantiti,
7 anni previsti *
Modalità archiviazione & Tracciamento
Altissima precision: 0.004s
Velocità max: 250 km/h
Attivazione antenna 3D
Autonomia batteria: 3 anni garantiti,
4 anni previsti *
Modalità archiviazione & Tracciamento
Utilizzando l’active extension, il decoder RACE RESULT supporta anche i transponder attivi. È necessario solo cavo loop come antenna. Può essere fissato a terra con nastro isolante o fissato a un tappetino. Sui circuiti di gara, può essere installato all’interno dei canali progettati per i circuiti di cronometraggio.
Il Loop Box stand-alone è un nuovo modo rivoluzionario per raccogliere i tempi negli intermedi. In corrispondenza dei punti di cronometraggio intermedi vicini, i rilevamenti vengono ripetuti in modalità wireless al sistema principale. In caso di punti di cronometraggio remoti, il Transponder ActivePro salva il tempo al suo interno per poi trasmetterlo al sistema principale quando arriva al traguardo.
La USB Timing Box è la comoda alternativa al sistema attivo. È collegato direttamente al PC e non richiede un decoder. Grazie alla batteria e alla memoria interna, è possibile mantenere un cronometraggio affidabile al 100% in caso di guasto del computer. La USB Timing Box può essere combinata con i Loop box.
Con il Track Box, è possibile fornire tracciamento e cronometraggio con lo stesso transponder. I Track Box posizionati lungo il percorso o sui veicoli da corsa ricevono i ping da tutti i transponder abilitati al tracking entro un raggio di 50 m e trasmettono i dati online. È quindi possibile utilizzare questi dati per produrre una visualizzazione di tracciamento in tempo reale e per pubblicare una quantità di intermedi senza precedenti.
La Management Box è un componente chiave per la soluzione di tracciamento, in quanto è necessaria per attivare e disattivare il tracciamento sui transponder, nonché per gestire i Track Box.
Consente inoltre di controllare facilmente l'inventario dei transponder, di generare file di chip e di impostare i transponder in modalità Sonno Profondo.
Tre opzioni
ActivePro e MotorKart sono transponder di fascia alta con un'antenna di attivazione 3D, altissima precisione e una rivoluzionaria funzione di tracciamento. ActiveBasic è l'alternativa economica con attivazione 1D e meno precisione.
Flessibilità
Tutti i transponder possono essere utilizzati nella stessa gara (ad esempio ActivePro per ciclisti d'élite, ActiveBasic per amatori).
Antenna di attivazione 3D
L'antenna di attivazione 3D di ActivePro garantisce un rilevamento affidabile in qualsiasi orientamento.
Precisione
Grazie all'antenna 3D, ActivePro offre una precisione di 1/100 di secondo
Durata della batteria
I transponder ActivePro e MotorKart possono essere impostati nella modalità di Sonno Profondo, che riduce il consumo di energia e ne aumenta la durata della batteria.
Active Basic | ActivePro V2 | MotorKart | |
Loop detection antenna | 1D activation antenna | 3D activation antenna– detects equally in any orientation | |
Detection speed | 75 km/h (45 mph) | 150 km/h (90 mph) | up to 250 km/h (155 mph) |
Timing accuracy | 2/10th second | 1/100th second 1) | 4/1,000th second 1) |
Precision sweet spot | at 30-60 km/h | at 60-90 km/h | |
Reaction time | 250 ms | 125 ms | |
Passings storage | no | 64 passings up to 24 hourstime drift of ± 70 ms per hour (20 ppm) | 128 passings up to 24 hourstime drift of ± 70 ms per hour (20 ppm) |
Tracking mode | no | tracking rate 1 time per second | tracking rate 2 times per second |
Deep sleep mode | no | reduces power consumption by 40% | reduces power consumption by 70% |
Prewarn before passingfor fast identification | no | yes | yesPrewarn acknowledgement |
Expected battery life 2) | 12 years & 300,000 passings | 7 years & 200,000 passings | 4 years & 300,000 passings |
Guaranteed battery life 3) 4) 5) | 7 years & 150,000 passings | 5 years & 100,000 passings | 3 years & 200,000 passings |
Tracking lifetime | - | 2,000 hours | 1,200 hours |
Battery indicator | temperature compensated battery status data in passing | ||
Dimensions | 36 x 40 x 9 mm | ||
Weight | 16.8 g | ||
Housing | IP69 TPE molded case sealed with PU compound100% salt water proof | ||
Temperature 5) | -25°C to 70°C | ||
Shock Resistance | >1,000 G | ||
1) At 30% loop power & 30 cm wide loop 2) Expectation based on usage without Tracking 3) Whichever comes first 4) Battery consumption is cumulative, e.g. 50,000 passings & 1,000 Tracking hours exploit the guarantee 5) Battery Warranty limited to temperatures above -10°C |
Active Transponder Tray | |
Dimensions | 522 x 297 x 12 mm |
Weight | approx. 1 kg (including 50 transponders) |
Material | 4 mm rugged PE (UV stabilized) |
Features | Stackable, with numbering 1-50 / 51-100 |
The Active Chip Holder is included with every Active Motor Transponder and also sold seperately in the SHOP.
Active Chip Holder | |
Dimensions | 50 x 58 x 20 mm |
Weight | 14 g (incl. 3 O-rings) |
Material | High-impact resistant plastic |
Compatible with | Active Basic, Active Pro, Active Motor |
Contents | Active Chip Holder, 3 O-rings |
Feature | Can be mounted on plain surfaces or tubes |
Note: To guarantee full performance, the Active Motor transponder needs at least 5-10 mm distance to any metal/carbon part. |
* In Deep Sleep Mode, the ActivePro and MotorKart transponders need 40% less energy, which can increase their lifetime by up to 30%.
2.4 GHz RF & loop specification | |
Transponder 2.4 GHz channel frequencies(worldwide compliance) |
1: 2.480 MHz / 2.405 MHz 2: 2.405 MHz / 2.470 MHz 3: 2.425 MHz / 2.465 MHz 4: 2.475 MHz / 2.440 MHz 5: 2.415 MHz / 2.445 MHz 6: 2.460 MHz / 2.430 MHz 7: 2.435 MHz / 2.455 MHz 8: 2.450 MHz / 2.420 MHz |
2.4 GHz TX power | 17.5 dBm |
Loop frequency & data | 125 kHz data-packet = Loop ID + channel packet rate: 150 Hz OOK-modulation, manchester encoded, 16bit anti-false-wakeup pattern |
Loop power | 100% = 250 mA RMS regulated peak current |
Loop length | 5 m - 25 m, >0.5 mm²standard 4 mm banana plugs |
Internal data buffer | 1,000 transponders |
Read range 25% Loop power 100% Loop power | 60 cm (2 ft) 2 m (6 ft) |
Detection rate Read rate | 100% > 250 chips/second burst for 4 seconds > 50 chips/second continuously |
Battery | LiPo, 4,000 mAh, 3.7 V 12 hours |
USB 1.1 | 500 mA |
Safety & conditions Management Box | |
Protection class with cable / antenna screwed on |
IP67 -waterproof- |
Safety norm | EN60950 |
Regulatory conformity | CE, RoHS, FCC |
Temperature | -30°C to 70°C |
Dimensions / weight | 27 x 66 x 117 mm / 274 g |
With Tracking Mode activated, the ActivePro V2 sends out a ping every second. RACE RESULT Track Boxes receive these signals and transmit them via mobile network to the timing server. This allows for better athlete tracking without the need for additional tracking devices. The Track Box is also the easiest way to set up split points in remote places.
Safety & conditions Track Box | |
Protection class |
IP64 -waterproof- |
Safety norm | EN60950 |
Temperature | -20°C to 70°C |
Dimensions / weight | 165 x 102 x 32 mm / 400 g |
Connectivity | |
Internal GPS | Qualcomm gpsOne Gen8 with GLONASS |
Internal 3G | 7 band 3G + quadband GPRSStandard SIM-Card |
Battery | |
Battery type | LiPo, 4,000 mAh, 3.7 V |
Charge current | 230mA at 15V (full in 5h) 150mA at 12V (full in 10h) |
Battery life | Moving: 1 day Stationary: 3-5 days |
2.4 GHz RF specification | |
Transponder 2.4GHz channel frequencies (worldwide compliance) | 1: 2.480 MHz 2: 2.405 MHz 3: 2.425 MHz 4: 2.475 MHz 5: 2.415 MHz 6: 2.460 MHz 7: 2.435 MHz 8: 2.450 MHz |
2.4 GHz TX Power | 3,5 dBm |
Internal Data Buffer | 10,000 trackping records |
Read Range | 50 m - 150 m |
10 Track Boxes Pack | |
Content | Foam-padded suitcase with shoulder strap 10 Track Boxes Track Box charge adapter 15 V AC adaptor with universal power inlet Mains power lead |
Dimensions / weight | 390 x 300 x 135 mm / 5.5 kg |
The USB Timing Box enables you to setup your timing line in a split second! Directly connected to a computer, the USB Timing Box does not require a decoder. The USB Timing Box is used best to time sporting events, to scan tags at race pack pick-up, or for just about any other application. The open-source software of the USB Box allows you to develop any solution that may have nothing to do with sports timing.
2.4 GHz RF & loop specification | |
Transponder 2.4 GHz channel frequenciesmain / backup (worldwide compliance) |
1: 2.480 MHz / 2.405 MHz 2: 2.405 MHz / 2.470 MHz 3: 2.425 MHz / 2.465 MHz 4: 2.475 MHz / 2.440 MHz 5: 2.415 MHz / 2.445 MHz 6: 2.460 MHz / 2.430 MHz 7: 2.435 MHz / 2.455 MHz 8: 2.450 MHz / 2.420 MHz |
2.4 GHz TX power | 17.5 dBm |
Loop frequency & data | 125 kHz data-packet = Loop ID + channel packet rate: 150 Hz OOK-modulation, manchester encoded, 16bit anti-false-wakeup pattern |
Loop power | 100% = 250 mA RMS regulated peak current |
Loop length | 5 m - 25 m, >0.5 mm²standard 4 mm banana plugs |
Internal data buffer | 1,000 transponders |
Read range 25% Loop power 100% Loop power | 60 cm (2 ft) 2 m (6 ft) |
Detection rate Read rate | 100% > 250 chips/second burst for 4 seconds > 50 chips/second continuously |
Battery | LiPo, 4,000 mAh, 3.7 V 12 hours |
USB 1.1 | 500 mA |
Safety & conditions USB Timing Box | |
Protection class with cable / antenna screwed on |
IP67 -waterproof |
Safety norm | EN60950 |
Regulatory conformity | CE, RoHS, FCC |
Temperature | 30°C to 70°C |
Dimensions / weight | 27 x 66 x 117 mm / 266 g |
Connect the Active Extension to your Decoder and plug in a wire loop to time with Active Transpondes.
Active
transponders ensure highest precision, accuracy and reliability for cycling, triathlons, inline, skiing or motor sports.
2.4GHz RF & loop specification | |
Transponder 2.4 GHz channel frequencies main/ backup (worldwide compliance) |
1: 2.480 MHz / 2.405 MHz 2: 2.405 MHz / 2.470 MHz 3: 2.425 MHz / 2.465 MHz 4: 2.475 MHz / 2.440 MHz 5: 2.415 MHz / 2.445 MHz 6: 2.460 MHz / 2.430 MHz 7: 2.435 MHz / 2.455 MHz 8: 2.450 MHz / 2.420 MHz |
2.4 GHz TX power | 17.5 dBm |
Loop frequency & data | 125 kHz Data-Packet = Loop ID + channel Packet rate: 150 Hz OOK-modulation, manchester encoded, 16 bit anti-false-wakeup pattern |
Loop power | 100% = 250 mA RMS regulated peak current |
Loop cable & length | 5 m - 25 m, >0,5 mm² standard 4 mm banana plugs |
Data cable | 5 m (standard), 15 m, 20 m |
Read range25% loop power 100% loop power |
60 cm (2 ft)2.5 m (8 ft) |
Detection rate read rate |
100% > 250 chips per second burst for 4 seconds > 50 chips per second continuously |
Internal data buffer | 1,000 passings |
Clock stability | 24/1,000th second per day0.28 ppm TCXO calibrated to rubidium frequency standard traceable to NIST |
Forewarn data delay | 100 ms (from entering the loop field) |
Max Passing Data Delay | 250 ms (after loop center) |
Repetitive Passing rate over loop | 1 per second |
Safety & Conditions Active Extension V2 | |
Protection class with cable/antenna screwed on | IP67 -waterproof- |
Safety norm | EN60950 |
Regulatory conformity | CE, RoHS, FCC |
Temperature | -30°C to 70°C |
Dimensions / weight | 27 x 66 x 117 mm / 190g |
RACE RESULT System firmware version 1.94 or higher recommended
For additional timing points you only need a stand-alone RACE RESULT Loop Box with loop cable to capture times.
Store Mode
The ActivePro V2 saves up to 64 split times in Store Mode and transmits them at the next timing system.
Repeat Mode
If the split point is within 500 meters of the main timing system, all
timing data is transmitted in real-time wirelessly from the Loop Box to the Active Extension.
The Repeat Mode is the smartest solution for triathlon transition zones.
Safety & conditions Loop Box | |
Protection class with cable / antenna screwed on |
IP67 -waterproof- |
Safety norm | EN60950 |
Regulatory conformity | CE, RoHS, FCC |
Temperature | -30°C to 70°C |
Dimensions / weight | 27 x 66 x 117 mm / 272 g |
Loop Box | |
Maximum repeat range | Up to 900 m with direct line of sight |
Passings transmission | Up to 40/second continuously |
Passing transmission delay | 200 ms – compensated |
Internal data buffer | 1,000 passings |
Power & battery | |
AC power supply Loop Box V2 |
110 V-230 V 50-60 Hz (2 A fuse) |
Loop Box V2 | 10 V-15 V, 100 mA (at 100% loop power) |
Battery | LiPo, 4,000 mAh, 3.7 V 12-20 h depending on loop power |