Nota: il telecomando e le modalità sono stati modificati nel novembre 2018. Se hai già acquistato l'orologio prima di allora e non ha un ingresso jack da 3,5 mm sul lato, fai riferimento alla sottosezione per la tua versione di seguito.
Telecomando:
Formato display
Durante la configurazione, l'orologio utilizza sempre il formato HH:MM:SS.
Per le modalità Count-up e Count-down il formato di visualizzazione desiderato può essere scelto con i pulsanti INT, FGB e TBT.
- INT: HH:MM:SS (max 99:59:59)
- FGB: MM:SS.kk (max 90:59.99)
- TBT: passa automaticamente tra le due modalità quando viene raggiunta 1 ora
Input Jack
Un ingresso jack da 3,5 mm è accessibile sul lato dell'orologio, sotto il connettore per l'alimentazione.
Questo ingresso può essere utilizzato per raccogliere impulsi da qualsiasi tipo di dispositivo per avviare e arrestare l'orologio, proprio come se si stesse premendo il pulsante OK.
Modalità:
Countdown / -up
Funzione: conto alla rovescia da o progressivo fino a un tempo specificato
Formato ora: HH:MM:SS
Accuratezza: ±20 ppm
Per accedere ed usare il countdown / - up:
- Premere il pulsante "freccia Su" per contare in avanti o il pulsante "freccia Giù" per contare alla rovescia
- Usa il pulsante “Edit” per impostare l'orario di partenza per il count-down/up
- Immettere l'ora desiderata utilizzando il tastierino numerico
- Premi nuovamente“Edit” per salvare
- Usa il pulsante “±10S” per attivare o disattivare il conto alla rovescia di 10 secondi
- “-10” sta per no pre-countdown
- “10” sta per pre-countdown di 10 secondi
- Selezionare il formato di visualizzazione desiderato utilizzando il pulsante INT, FGB o TBT
- Premi “OK” per avviare / mettere in pausa il timer
Orologio
Funzione: visualizza un normale orologio in formato 12 o 24 ore
Formato ora: HH:MM:SS
Accuratezza: ±20 ppm
Per accedere e utilizzare la modalità orologio:
- Premi il pulsante “Clock”
- Utilizzare i pulsanti "12 ore" e "24 ore" per passare dal formato 12 ore al formato 24 ore
- Usa il pulsante “Edit” per impostare l'orologio
- la prima cifra inizierà a lampeggiare e potrà essere impostata utilizzando il tastierino numerico
- una volta terminato di impostare l'ora, premere nuovamente “Edit” per salvare l'ora
Cronometro
Funzione: cronometro
Tempo massimo: 99:59.99
Formato ora: MM:SS.kk
Accuratezza: ±20 ppm
Per accedere e utilizzare il cronometro:
- Premere il pulsante del cronometro per accedere alla modalità Cronometro
- Utilizzare il pulsante "± 10S" per attivare o disattivare il conto alla rovescia di 10 secondi
- “-10” sta per no pre-countdown
- “10” sta per pre-countdown di 10 secondi
- Premi "OK" per avviare / mettere in pausa il cronometro
- Utilizza il pulsante di reset (non etichettato) per ripristinare il cronometro quando è in pausa
Cronometro Maratona
Funzione: cronometro con backup interno (il tempo continua a scorrere anche se l'orologio è scollegato)
Formato ora: HH:MM:SS
Accuratezza: ±20 ppm
Per accedere e utilizzare il cronometro Maratona:
- Premere il pulsante del cronometro della maratona (non etichettato)
- Utilizzare il pulsante "± 10S" per attivare o disattivare il conto alla rovescia di 10 secondi
- “-10” sta per no pre-countdown
- “10” sta per pre-countdown di 10 secondi
- Premi“OK” per avviare/fermare il cronometro
- Utilizzare il pulsante di ripristino (non etichettato) per ripristinare il cronometro quando è in pausa
Conto alla rovescia ripetuto
Funzione: ripete il conto alla rovescia impostato
Formato ora: HH:MM:SS
Tempo massimo: 99.99:59
Accuratezza: ±20 ppm
Per accedere e utilizzare questa modalità:
- Premere il pulsante "Up/Dn" per entrare in modalità intervallo.
- Premere il pulsante "Edit"
- Immettere l'ora desiderata utilizzando il tastierino numerico
- Premi nuovamente“Edit” per salvare
- Usa il pulsante “±10S” per attivare o disattivare il conto alla rovescia di 10 secondi
- “-10” sta per no pre-countdown
- “10” sta per pre-countdown di 10 secondi
- Premi “OK” per avviare / mettere in pausa il timer
Remote and modes (pre-November 2018, no 3.5 mm jack input)
Countdown / -up
Function: count up to or down from a specified time
Time format: hh:mm:ss
Accuracy: ±40 ppm
Caution: it is possible to enter non valid minutes (over 59) on the next full minute the minutes will jump to 00
To access and use countdown / - up:
- Press the "Up" button to count up, or the “Down” button to count down
- Use the “Edit” button to set the time to count up or down from
- Enter the desired time using the number pad
- Press “Edit” again to save
- Use the “±10S” button to turn the 10 second pre-countdown on or off
- “-10” stands for no pre-countdown
- “10” stands for 10 second pre-countdown
- Press “OK” to start/pause the timer
Clock
Function: displays a normal clock in either 12h or 24h format
Time format: hh:mm:ss
Accuracy: ±120 ppm
To access and use the Clock mode:
- Press the “Clock” button
- Use the “12Hrs” and “24Hrs” buttons to switch between 12 and 24-hour format
- Use the “Edit” button to set the clock
- the first digit will start flashing and can be set using the number pad
- when done setting the time press “Edit” again to save the time
Stopwatch
Function: stopwatch
Maximum time: 99:59.99
Time format: mm:ss.kk
Accuracy: ±40 ppm
To access and use the stopwatch:
- Press the stopwatch button to enter Stopwatch mode
- Use the “±10S” button to turn the 10 second pre-countdown on or off
- – “-10” stands for no pre-countdown
- – “10” stands for 10 second pre-countdown
- Press “OK” to start/pause the stopwatch
- Use the reset (not labeled) button to reset the stopwatch when it is paused
Marathon Timer
Function: stopwatch
Time format: hh:mm:ss
Accuracy: ±120 ppm
To access and use the Marathon Timer:
- Press the marathon timer button (not labeled)
- Use the “±10S” button to turn the 10 second pre-countdown on or off
- “-10” stands for no pre-countdown
- “10” stands for 10 second pre-countdown
- Press “OK” to start/pause the stopwatch
- Use the reset (not labeled) button to reset the stopwatch when it is paused
Interval Timer
Function: repeats timer until count is reached
Time format: cc.mm:ss
Maximum time: 99.99:59
Accuracy: ±40 ppm
To access and use the Interval Timer:
- Press the “Int” button to enter interval mode
- Press the “Edit” button
- Set the number of intervals using the number pad
- Press the “Edit” button
- Set the time for the f rst interval using the number pad
- Press the “Edit” button
- Set the time for the second interval using the number pad
- Press the “Edit” button
- Use the “Up/Dn” button to decide if the timer should count up to or down from the set times
- Use the “±10S” button to turn the 10 second pre-countdown on or off
- “-10” stands for no pre-countdown
- “10” stands for 10 second pre-countdown
- Press “OK” to start/pause the timer