![]() |
BE |
De plus en plus d'épreuves élite s'appuient sur le système actif RACE RESULT, combinant précision et fiabilité avec des fonctionnalités uniques telles que le tracking et le mode Store.
Le décodeurs associé à l'Active Extension vous permet d'attendre un taux de détection de 100 %. L'antenne est alors une simple boucle de câble électrique, que vous pouvez coller au sol ou enterrer.
Précision: 0,2 s
Vitesse max.: 75 km/h
Antenne d'activation 1D
Batterie: 7 ans garantis,
12 ans attendus *Tracking non supporté
Haute précision: 0,01 s
Vitesse max.: 150km/h
Antenne d'activation 3D
Batterie: 5 ans garantis,
7 ans attendus *
Mode Store & Tracking
Très haute précision: 0,004 s
Vitesse max.: 250km/h
Antenne d'activation 3D
Batterie: 3 ans garantis,
4 ans attendus *
Mode Store & Tracking
* Pour plus d'information, consulter la Fiche Technique
Connecté à l'Active Extension, votre décodeur RACE RESULT est en mesure de lire les transpondeurs actifs. La boucle d'activation peut être collée au sol ou fixée à un tapis. Sur les circuits, elle peut être insérée dans les encoches prévues à cet effet.
La Loop Box a révolutionné la prise de temps intermédiaires. Lorsqu'elle se trouve à proximité du système principal, elle lui répète ses détections en temps réel. Lorsqu'elle se trouve sur le parcours, elle active simplement les transpondeurs ActivePro, qui enregistrent la détection et la transmettent lorsqu'il passent la ligne d'arrivée.
L'USB Timing Box est la version de poche de notre système actif. Connectée directement à votre PC, elle ne nécessite pas de décodeur. Grâce à sa mémoire tampon, elle peut stocker les détections en cas de problème avec votre ordinateur. L'USB Timing Box est également compatible avec les Loop Box.
Avec la Track Box, vous pouvez proposer du tracking et du chronométrage avec le même transpondeur. Les Track Boxes placées le long du parcours ou sur les véhicules suiveurs reçoivent les track pings émis par les transpondeurs actifs dans un rayon d'environ 50 m et transmettent les données en ligne en temps réel. Vous pouvez alors utiliser ces données pour visualiser la position des concurrents sur une carte, et pour proposer un nombre conséquent de points intermédiaires.
La Management Box est un élément clé de notre solution de tracking, requis pour activer et désactiver le mode tracking sur les transpondeurs, ainsi que pour gérer les Track Boxes.
Elle vous permet également de faire l'inventaire de vos transpondeurs, de créer vos tables de correspondances, et de passer vos transpondeurs en mode Deep Sleep.
Three options
The ActivePro and the MotorKart are high-end transponders with a 3D activation antenna, very high
precision and a revolutionary tracking feature. The ActiveBasic is the cost-efficient alternative with 1D activation
and less precision.
Flexibility
All transponders can be used in the same race (for example ActivePro for elite riders, ActiveBasic for amateurs).
3D activation antenna
The 3D activation antenna of the ActivePro ensures reliable detection in any orientation.
Precision
Because of the 3D antenna, the ActivePro offers a true 1/100th second precision
Battery lifetime
The ActivePro and MotorKart transponders can be set to deep sleep mode, which reduces the energy consumption and increases battery lifetime.
Active Basic | ActivePro V2 | MotorKart | |
Loop detection antenna | 1D activation antenna | 3D activation antenna– detects equally in any orientation | |
Detection speed | 75 km/h (45 mph) | 150 km/h (90 mph) | up to 250 km/h (155 mph) |
Timing accuracy | 2/10th second | 1/100th second 1) | 4/1,000th second 1) |
Precision sweet spot | at 30-60 km/h | at 60-90 km/h | |
Reaction time | 250 ms | 125 ms | |
Passings storage | no | 64 passings up to 24 hourstime drift of ± 70 ms per hour (20 ppm) | 128 passings up to 24 hourstime drift of ± 70 ms per hour (20 ppm) |
Tracking mode | no | tracking rate 1 time per second | tracking rate 2 times per second |
Deep sleep mode | no | reduces power consumption by 40% | reduces power consumption by 70% |
Prewarn before passingfor fast identification | no | yes | yesPrewarn acknowledgement |
Expected battery life 2) | 12 years & 300,000 passings | 7 years & 200,000 passings | 4 years & 300,000 passings |
Guaranteed battery life 3) 4) 5) | 7 years & 150,000 passings | 5 years & 100,000 passings | 3 years & 200,000 passings |
Tracking lifetime | - | 2,000 hours | 1,200 hours |
Battery indicator | temperature compensated battery status data in passing | ||
Dimensions | 36 x 40 x 9 mm | ||
Weight | 16.8 g | ||
Housing | IP69 TPE molded case sealed with PU compound100% salt water proof | ||
Temperature 5) | -25°C to 70°C | ||
Shock Resistance | >1,000 G | ||
1) At 30% loop power & 30 cm wide loop 2) Expectation based on usage without Tracking 3) Whichever comes first 4) Battery consumption is cumulative, e.g. 50,000 passings & 1,000 Tracking hours exploit the guarantee 5) Battery Warranty limited to temperatures above -10°C |
Active Transponder Tray | |
Dimensions | 522 x 297 x 12 mm |
Weight | approx. 1 kg (including 50 transponders) |
Material | 4 mm rugged PE (UV stabilized) |
Features | Stackable, with numbering 1-50 / 51-100 |
The Active Chip Holder is included with every Active Motor Transponder and also sold seperately in the SHOP.
Active Chip Holder | |
Dimensions | 50 x 58 x 20 mm |
Weight | 14 g (incl. 3 O-rings) |
Material | High-impact resistant plastic |
Compatible with | Active Basic, Active Pro, Active Motor |
Contents | Active Chip Holder, 3 O-rings |
Feature | Can be mounted on plain surfaces or tubes |
Note: To guarantee full performance, the Active Motor transponder needs at least 5-10 mm distance to any metal/carbon part. |
* In Deep Sleep Mode, the ActivePro and MotorKart transponders need 40% less energy, which can increase their lifetime by up to 30%.
2.4 GHz RF & loop specification | |
Transponder 2.4 GHz channel frequencies(worldwide compliance) |
1: 2.480 MHz / 2.405 MHz 2: 2.405 MHz / 2.470 MHz 3: 2.425 MHz / 2.465 MHz 4: 2.475 MHz / 2.440 MHz 5: 2.415 MHz / 2.445 MHz 6: 2.460 MHz / 2.430 MHz 7: 2.435 MHz / 2.455 MHz 8: 2.450 MHz / 2.420 MHz |
2.4 GHz TX power | 17.5 dBm |
Loop frequency & data | 125 kHz data-packet = Loop ID + channel packet rate: 150 Hz OOK-modulation, manchester encoded, 16bit anti-false-wakeup pattern |
Loop power | 100% = 250 mA RMS regulated peak current |
Loop length | 5 m - 25 m, >0.5 mm²standard 4 mm banana plugs |
Internal data buffer | 1,000 transponders |
Read range 25% Loop power 100% Loop power | 60 cm (2 ft) 2 m (6 ft) |
Detection rate Read rate | 100% > 250 chips/second burst for 4 seconds > 50 chips/second continuously |
Battery | LiPo, 4,000 mAh, 3.7 V 12 hours |
USB 1.1 | 500 mA |
Safety & conditions Management Box | |
Protection class with cable / antenna screwed on |
IP67 -waterproof- |
Safety norm | EN60950 |
Regulatory conformity | CE, RoHS, FCC |
Temperature | -30°C to 70°C |
Dimensions / weight | 27 x 66 x 117 mm / 274 g |
With Tracking Mode activated, the ActivePro V2 sends out a ping every second. RACE RESULT Track Boxes receive these signals and transmit them via mobile network to the timing server. This allows for better athlete tracking without the need for additional tracking devices. The Track Box is also the easiest way to set up split points in remote places.
Safety & conditions Track Box | |
Protection class |
IP64 -waterproof- |
Safety norm | EN60950 |
Temperature | -20°C to 70°C |
Dimensions / weight | 165 x 102 x 32 mm / 400 g |
Connectivity | |
Internal GPS | Qualcomm gpsOne Gen8 with GLONASS |
Internal 3G | 7 band 3G + quadband GPRSStandard SIM-Card |
Battery | |
Battery type | LiPo, 4,000 mAh, 3.7 V |
Charge current | 230mA at 15V (full in 5h) 150mA at 12V (full in 10h) |
Battery life | Moving: 1 day Stationary: 3-5 days |
2.4 GHz RF specification | |
Transponder 2.4GHz channel frequencies (worldwide compliance) | 1: 2.480 MHz 2: 2.405 MHz 3: 2.425 MHz 4: 2.475 MHz 5: 2.415 MHz 6: 2.460 MHz 7: 2.435 MHz 8: 2.450 MHz |
2.4 GHz TX Power | 3,5 dBm |
Internal Data Buffer | 10,000 trackping records |
Read Range | 50 m - 150 m |
10 Track Boxes Pack | |
Content | Foam-padded suitcase with shoulder strap 10 Track Boxes Track Box charge adapter 15 V AC adaptor with universal power inlet Mains power lead |
Dimensions / weight | 390 x 300 x 135 mm / 5.5 kg |
The USB Timing Box enables you to setup your timing line in a split second! Directly connected to a computer, the USB Timing Box does not require a decoder. The USB Timing Box is used best to time sporting events, to scan tags at race pack pick-up, or for just about any other application. The open-source software of the USB Box allows you to develop any solution that may have nothing to do with sports timing.
2.4 GHz RF & loop specification | |
Transponder 2.4 GHz channel frequenciesmain / backup (worldwide compliance) |
1: 2.480 MHz / 2.405 MHz 2: 2.405 MHz / 2.470 MHz 3: 2.425 MHz / 2.465 MHz 4: 2.475 MHz / 2.440 MHz 5: 2.415 MHz / 2.445 MHz 6: 2.460 MHz / 2.430 MHz 7: 2.435 MHz / 2.455 MHz 8: 2.450 MHz / 2.420 MHz |
2.4 GHz TX power | 17.5 dBm |
Loop frequency & data | 125 kHz data-packet = Loop ID + channel packet rate: 150 Hz OOK-modulation, manchester encoded, 16bit anti-false-wakeup pattern |
Loop power | 100% = 250 mA RMS regulated peak current |
Loop length | 5 m - 25 m, >0.5 mm²standard 4 mm banana plugs |
Internal data buffer | 1,000 transponders |
Read range 25% Loop power 100% Loop power | 60 cm (2 ft) 2 m (6 ft) |
Detection rate Read rate | 100% > 250 chips/second burst for 4 seconds > 50 chips/second continuously |
Battery | LiPo, 4,000 mAh, 3.7 V 12 hours |
USB 1.1 | 500 mA |
Safety & conditions USB Timing Box | |
Protection class with cable / antenna screwed on |
IP67 -waterproof |
Safety norm | EN60950 |
Regulatory conformity | CE, RoHS, FCC |
Temperature | 30°C to 70°C |
Dimensions / weight | 27 x 66 x 117 mm / 266 g |
Connect the Active Extension to your Decoder and plug in a wire loop to time with Active Transpondes.
Active
transponders ensure highest precision, accuracy and reliability for cycling, triathlons, inline, skiing or motor sports.
2.4GHz RF & loop specification | |
Transponder 2.4 GHz channel frequencies main/ backup (worldwide compliance) |
1: 2.480 MHz / 2.405 MHz 2: 2.405 MHz / 2.470 MHz 3: 2.425 MHz / 2.465 MHz 4: 2.475 MHz / 2.440 MHz 5: 2.415 MHz / 2.445 MHz 6: 2.460 MHz / 2.430 MHz 7: 2.435 MHz / 2.455 MHz 8: 2.450 MHz / 2.420 MHz |
2.4 GHz TX power | 17.5 dBm |
Loop frequency & data | 125 kHz Data-Packet = Loop ID + channel Packet rate: 150 Hz OOK-modulation, manchester encoded, 16 bit anti-false-wakeup pattern |
Loop power | 100% = 250 mA RMS regulated peak current |
Loop cable & length | 5 m - 25 m, >0,5 mm² standard 4 mm banana plugs |
Data cable | 5 m (standard), 15 m, 20 m |
Read range25% loop power 100% loop power |
60 cm (2 ft)2.5 m (8 ft) |
Detection rate read rate |
100% > 250 chips per second burst for 4 seconds > 50 chips per second continuously |
Internal data buffer | 1,000 passings |
Clock stability | 24/1,000th second per day0.28 ppm TCXO calibrated to rubidium frequency standard traceable to NIST |
Forewarn data delay | 100 ms (from entering the loop field) |
Max Passing Data Delay | 250 ms (after loop center) |
Repetitive Passing rate over loop | 1 per second |
Safety & Conditions Active Extension V2 | |
Protection class with cable/antenna screwed on | IP67 -waterproof- |
Safety norm | EN60950 |
Regulatory conformity | CE, RoHS, FCC |
Temperature | -30°C to 70°C |
Dimensions / weight | 27 x 66 x 117 mm / 190g |
RACE RESULT System firmware version 1.94 or higher recommended
For additional timing points you only need a stand-alone RACE RESULT Loop Box with loop cable to capture times.
Store Mode
The ActivePro V2 saves up to 64 split times in Store Mode and transmits them at the next timing system.
Repeat Mode
If the split point is within 500 meters of the main timing system, all
timing data is transmitted in real-time wirelessly from the Loop Box to the Active Extension.
The Repeat Mode is the smartest solution for triathlon transition zones.
Safety & conditions Loop Box | |
Protection class with cable / antenna screwed on |
IP67 -waterproof- |
Safety norm | EN60950 |
Regulatory conformity | CE, RoHS, FCC |
Temperature | -30°C to 70°C |
Dimensions / weight | 27 x 66 x 117 mm / 272 g |
Loop Box | |
Maximum repeat range | Up to 900 m with direct line of sight |
Passings transmission | Up to 40/second continuously |
Passing transmission delay | 200 ms – compensated |
Internal data buffer | 1,000 passings |
Power & battery | |
AC power supply Loop Box V2 |
110 V-230 V 50-60 Hz (2 A fuse) |
Loop Box V2 | 10 V-15 V, 100 mA (at 100% loop power) |
Battery | LiPo, 4,000 mAh, 3.7 V 12-20 h depending on loop power |