Después del arranque, el decodificador está en Modo de Prueba, es decir, no almacena ninguna detección. En su lugar, suena constantemente un pitido/parpadea cuando ve un transpondedor. De esta manera:
- La configuración del sistema se puede verificar fácilmente para asegurarse de que se detecte como se espera.
- No es necesario filtrar ninguna detección en el software de puntuación del calentamiento de los atletas antes de la carrera.
Modo de Cronometraje
El Modo de Cronometraje se iniciará al presionar el botón de START en el teclado. Si no se ejecuta en tiempo GPS, el tiempo comenzará a partir de las 0:00:00 y el decodificador comenzará a procesar y registrar de inmediato todas los tags que pasan por la antena.
Detener el Modo de Cronometraje
El Modo de Cronometraje se puede detener presionando el botón CANCEL o seleccionando la opción Stop Timing en el menú. El sistema estará de nuevo en Modo de Prueba.
La siguiente ocasión que se inicie el Modo de Prueba, el sistema crea un nuevo archivo para las detecciones, indicado por un nuevo número de archivo en la pantalla principal. Nótese que:
- A través de la interfaz de Ethernet, solo las detecciones de los archivos actuales se pueden leer.
- Se puede acceder a todos los archivos (antiguos) a través del browser o una memoria USB (vea Conexión de Datos).
Archivo de Emergencia
Si olvida iniciar el Modo de Cronometraje, todavía puede acceder a un archivo de pases de emergencia a través de Acceso con Navegador.
Decoder Passing File
All Decoder timing data will be stored in a passing file on the system. Each file has a unique ID, which is displayed on the main screen of the decoder, where it says File No.
A new passing file is started each time the decoder enters Timing Mode. When Timing Mode is stopped, the current file will be closed, and the next file will be created. If the decoder is in Test Mode, the current file number displayed on the screen will be used once Timing Mode is enabled. A passing is generated each time a transponder is read by the system or when a marker is created. When a decoder is in Timing Mode, all passing will be stored in the active passing file.
When connecting to a Decoder, only passings from the current passing file will be sent. When using Mobile Upload, only the current passing file will be uploaded unless otherwise configured in the Mobile Upload settings.
Passing files are permanently stored on the decoder. These files are small in size, and storage capacity is not a concern. If you ever need to access a past file, here are several ways you can do so.
- Downloading a Passing File from a RACE RESULT Decoder
- System Controls
- Decoder Browser Interface
- Timing System Archives
When locating the correct passing file, here are a few things to note.
- If a decoder has stopped Timing Mode, the next file is created, but it will not contain any data yet. This means the most recent file will actually be empty (shows 0 kb when looking at the file on your computer).
- Each file will show a date created. This can help find the correct file if you don't remember the ID.
Passing files can be read into RR12 following the article Read Passings File.