To switch the Decoder into Operation Mode, the host sends

STARTOPERATION<CrLf>

The decoder responds with:

STARTOPERATION;OK[;<Date>;<Time>]13<CrLf>

if the Decoder was switched into Operation Mode, with

STARTOPERATION;OPERATIONMODE[;<Date>;<Time>]13<CrLf>

if the Decoder already was in Operation Mode.

Where

<Date>	Date at which the decoder was successfully put into operation mode, format: yyyy-MM-dd. Since protocol version 1.3.
<Time>	Time at which the decoder was successfully put into operation mode, format: hh:mm:ss.kkk. Since protocol version 1.3.

Example

← STARTOPERATION<CrLf>
→ STARTOPERATION;OK;0000-00-00;00:10:00.000<CrLf>