The Start/Marker Push Button is an extended START button that will be connected to the Feature Port of the RACE RESULT Decoder. Instead of the button on the keypad, the button at the end of the cable can be pressed to start the Timing Mode or to set markers.
For events with many starts or a single start it may be easier to push the button instead of pressing the keypad button on the decoder on the ground.
The Start/Marker Push Button is available as an accessory in the raceresult.com shop.
DIY Conversion of the Start/Marker Push Button for UBIDIUM
To use our Start/Marker Push Button with UBIDIUM, a small adjustment is required. There are several different approaches.
Option 1: Extending the Push Button with banana plugs
Option 2: Conversion as a Y-adapter
Option 3: Construction of an adapter (XLR socket -> banana plugs)
