race|result System 5000s, 4.8m
Decoder + 4.8 meter Ground Antenna

Works with all race|result passive transponders.

Chip2Go
Chip-machine to program numbers to race|result Raw-Transponders (sold separately in shop)

Incl. 15V power supply and numeric keypad

Features:
- Programs single or duo Transponders
- Input bib number with touchscreen/number pad/optional bar code scanner
- Chip increasing/decreasing number range
- Check antenna for passive chips
- Reads bib numbers from chip file on USB stick

Datasheet

Ground Antenna, 4.8m
4.8m Ground Antenna
As replacement for the race|result System or for use with third-party systems.
Connectors: BNC
Now with handy carrying handle!

Datasheet

6m Extension Kit
Two empty antenna elements to extend the 4.8m ground antenna to 6m.

8m Extension Kit
4 empty mats and 2 antenna mats to extend the 4.8m ground antenna to 8m.

Now comes with a folding hand trolley!

Side Antenna Kit
Side Antenna Kit containing:
- 4 side antennas
- 2 heavy-duty tripods with flat foot
- 2x 2 meter cable
- 2x 10 meter cable

Ideal for intermediate timing points.
May also be used for finish lines with low density.

High Gain UHF Antenna
High Gain UHF Antenna for special applications including Holder and Clamp.

No cable included.

2m connecting cable for High Gain UHF Antenna
2m Cable for connecting one High Gain UHF Antenna to a Decoder N(90°)-BNC

12m connecting cable for High Gain UHF Antenna
12m Cable for connecting one High Gain UHF Antenna to a Decoder N(90°)-BNC

race|result Decoder 5000s
Only Decoder

no Ground Antenna or Active Extension included

12V Battery Booster
Converter for external 12V Battery. Increases external battery run time by a factor of x2. External battery is first fully discharged, before internal battery is used. Compensates voltage drops across cable and connectors. LED status indication. 100% waterproof. Compatible with all 4000/5000 series decoders.

External 4G/LTE Antenna
Robust High Performance Antenna including holding clamp and 2,5m cable.

100% weather proof. Improves reception on 2G/3G/4G networks significantly over the internal decoder antenna.
Can only be used if decoder is equipped with 4G/LTE module and external antenna connector on front panel.

race|result Tag Reader
For certificate and registration kiosks, chip-file creation, etc.

Emulates a keyboard and reads all race|result UHF Tags.

New in version 2:
- increased read range
- no driver installation necessary
- UHF frequency and read power definable in software
- software controllable beeper

Download driver and software in the Download Section.

Start/Marker Push-Button
The push-button can be connected to the feature port and can start the timing mode or set a marker.
Cable length: 1.8m

ALGE/TAG Heuer Connection Cable
3m connection cable for ALGE and TAG Heuer products with 4mm banana plug. Connect photo cells, light barriers, start gates, etc. to the feature port of the race|result System.
Possible use cases: start timing mode, set marker, precise timing for last/next transponder.

Test Transponder
Before big important events the test transponder can validate that every single antenna of the race result System is working properly.
The transponder should be detected in about 1m height above the antenna.