External 4G/LTE Antenna
Robust High Performance Antenna including holding clamp and 2,5m cable.

100% weather proof. Improves reception on 2G/3G/4G networks significantly over the internal decoder antenna.
Can only be used if decoder is equipped with 4G/LTE module and external antenna connector on front panel.

12V Battery Booster
Converter for external 12V Battery. Increases external battery run time by a factor of x2. External battery is first fully discharged, before internal battery is used. Compensates voltage drops across cable and connectors. LED status indication. 100% waterproof. Compatible with all 4000/5000 series decoders.

USB Charger
This Adapter can charge Loop Boxes, Management Boxes, and both types of Trackboxes as well as TrackTiming.
You will need a USB A port that supplies at least 2.4A.

Input: 5V; 2.4A
Output: 12V; max 0.75A
Output power: max 9.0W

Note:
This device does not support fast charging of Active Track Boxes.
Only charge one Track Box Passive at a time.

Ubidium Carrying bag
Sturdy bag for transporting Ubidium and accessories. Includes shoulder strap, handle, mesh wall inside, ID window.

Material: Nylon with PVC coating
Size: 39 x 26 x 18 cm

High Gain UHF Antenna
High Gain UHF Antenna for special applications including Holder and Clamp.

No cable included.

2m connecting cable for High Gain UHF Antenna
2m Cable for connecting one High Gain UHF Antenna to a Decoder N(90°)-BNC

12m connecting cable for High Gain UHF Antenna
12m Cable for connecting one High Gain UHF Antenna to a Decoder N(90°)-BNC

Heavy Duty Tripod
Stable design for use with High Gain UHF antennas or the Track Box Passive.

Weight: 6.5 kg
Base diameter: ø 950 mm
Height: from 1.24 to 1.94 m
Tube end: ø 35 mm
Max. load capacity: 50 kg
Material: steel

Suitable mounting clamps for the High Gain UHF antennas are included with the antennas.

Instructions for mounting the Track Box Passive can be found here.

RACE RESULT Tag Reader
For certificate and registration kiosks, chip-file creation, etc.

Emulates a keyboard and reads all RACE RESULT UHF Tags.

New in version 2:
- increased read range
- no driver installation necessary
- UHF frequency and read power definable in software
- software controllable beeper

Download driver and software in the Download Section.

RACE RESULT BLE Reader
Portable UHF Reader. Connectes via BLE to the RACE RESULT EventTools App on smartphones and tablets.

Works with all RACE RESULT Passive Transponders

Includes:
- Bluetooth Reader
- USB cable for charging
- Magnetic Mounting Pad
- Spare Battery

Loop Cable on Roll, 30m
Use cable and banana plug to build your own custom length loop

Banana Plug
Use cable and banana plug to build your own custom length loop

125kHz Detector
The detector picks up any electromagnetic field which would activate the active transponders and converts it into an acoustic signal.
For tracking sources of interference in setups or checking storage locations for your active transponders. The detector can be used at an event to monitor active loops, helping to determine their location if laid under the ground, or finding weak spots.

Start/Marker Push-Button
The push-button can be connected to the feature port and can start the timing mode or set a marker.
Cable length: 1.8m

ALGE/TAG Heuer Connection Cable
3m connection cable for ALGE and TAG Heuer products with 4mm banana plug. Connect photo cells, light barriers, start gates, etc. to the feature port of the RACE RESULT System.
Possible use cases: start timing mode, set marker, precise timing for last/next transponder.

Standard Impulse Connector Cable
3m cable to connect external devices to our Active devices (e.g. Photo cell, light barrier, start gate, etc.). Connect to Ground to trigger. Special devices which require power output are not supported.