Loop Box when it is in Repeat Mode and connected to mains power. Repeat mode is indicated by an R in the display. The moving icon in the top right corner indicates that a Loop is connected. The antenna symbol in the bottom left indicates a wireless connection to the receiving device (Loop# 1 on the same Ch#) is established.

The bottom right section of the screen will flash between these two screens.

The top screen shows the battery indicator.

The bottom screen shows the voltage. A range between 11.5V and 12.0V is good.

Loop Box when it is in Repeat Mode and on battery power. The "19h" displayed in the bottom right corner indicates the time until zero battery in hours.

Loop Box when it is in Store&Forward Mode and running on battery. Store&Forward mode is indicated by an S in the display. The antenna symbol in the bottom left corner indicates a connection to a main system is established and passings are forwarded in additional to the stored detection.

Loop Box when it is in Impulse Mode and connected to mains power. The functionality is identical to Repeat Mode, except for the 3.5mm jack which functions as a Trigger In. Impulse mode is indicated by an I in the display.