Warning: These settings should be used with great caution, they are no longer recommended when timing/scoring with RACE RESULT 12 as markers can be assigned directly in the software.

By default the Timing Mode is set to +Marker which will add markers in to the passing file with the assigned marker number. 

Alternatively it is possible to match markers to transponder reads on the decoder directly, this is used at events such as MTB downhill where the transponder is used for identification but the time should be taken from a marker from a trigger input such as photocells. 

Depending on the setup you can assign the system to look for either: Chip first (1. Chip, 2. Photo cell) or the marker first (1. Photo Cell, 2. Chip). 

A maximum time between chip / cell can also be set. 

If a marker is not received in accordance to the rules, then the transponder time is not saved. For this reason this mode must not be used under normal circumstances.