When more than one timing system is used at the same location, for example a main and a backup line, the detection fields of the systems can interfere with each other. A transponder cannot communicate with two readers at the same time, so overlapping detection fields reduce the read rates of both systems.
Each system type has its own minimum distance to other systems. When combining two different system types, always use the greater of the two distances.
| Combination | Minimum distance |
|---|---|
| Decoder + Ubidium | 5 m / 16 ft |
| Track Box Passive + Decoder | 20 m / 66 ft |
| Track Box Passive + Ubidium | 20 m / 66 ft |
Decoder and Ubidium
A Decoder with a Foldable Ground Antenna needs at least 3 m / 10 ft to the next detection line. An Ubidium Ground Antenna needs at least 5 m / 16 ft. The greater distance applies, so keep the two antennas at least 5 m / 16 ft apart.

Track Box Passive and Other Systems
The Track Box Passive has a much larger read zone than a ground antenna. Keep at least 20 m / 66 ft between a Track Box and any other timing system, including a Decoder with a ground antenna or high-gain antenna, and an Ubidium. Because 20 m is the greatest limitation, it always applies when a Track Box is combined with another system type.
Extending One Line Across a Wider Course
For a wider detection line, only use one system type. Never join two different system types in one line. Their detection fields overlap where the antennas meet, and there is no method to separate them.
How a line is extended depends on the system type:
- Decoder: two Decoders can be placed side by side, with a dummy element between the two ground antennas. See Combining multiple ground antennas and decoders.
- Ubidium: one Ubidium can run a ground antenna of up to 30 elements (23 m / 75 ft), so a second system is not needed. See Ubidium Ground Antenna Setup Precautions.
- Track Box Passive: two Track Boxes can cover a line up to 8 m / 26 ft wide. See Track Box Passive Setup Precautions.

The main and backup lines can use different system types, as long as each line uses only one system type and the lines are spaced using the distances above.
