Forgot your password? Register
Client Mode

Valid <SETTING>s are:

HOST;<HostNum>

Set/get host entry <HostNum> (1 -> 10).

Set <PARAMETERS> (separated by ;)

<Configure>

1, if the host should be configured, 0 if the host should be marked as not configured

<Host>

Name or IP of host to connect to

<Port>

Port to connect to

<KeepAlive>

Time in seconds, after the decoder reestablishes the connection, if no command was received

<AutoStart>

Automatically establish connection after boot

Set response

SETCONFIG;CLIENTMODE;HOST;<HostNum>;<Configure>;<Host>;<Port>;<KeepAlive>;<AutoStart>    

Get response

GETCONFIG;CLIENTMODE;HOST;<HostNum>;<Configure>;<Host>;<Port>;<KeepAlive>;<AutoStart>;<IsConnected>

Where <IsConnected> is 1, if the connection is currently established, 0 otherwise.

USEUPLOADGPRSSETTINGS

Specifies whether the decoder should use the upload connection settings when connecting to a host. This can be used to use establish a GPRS connection.

Set <PARAMETERS>

<UseSettings>

1, if upload settings should be used, 0 (default) otherwise

Set response

SETCONFIG;CLIENTMODE;USEUPLOADGPRSSETTINGS;<UseSettings>

Get response

GETCONFIG;CLIENTMODE;USEUPLOADGPRSSETTINGS;<UseSettings>
×

Do you have a question?

Our team is happy to advise you personally.

Contact us!

The team at RACE RESULT will be happy to assess your individual needs, troubleshoot existing issues and answer any questions that you might have. Feel free to reach out through the provided form now.

If you have a support question, please add your event ID!

I have read the data privacy terms.