Ubidium can be connected via ethernet cable directly to your computer or to any local network. Ubidium has three ethernet ports located under the front flap, any of these can be used to connect to your computer or network.

When connecting Ubidium via a local network you will need to run the RACE RESULT Web Server on your computer in order to connect through RACE RESULT 14. 

Note that many laptops do not offer an ethernet port as standard so it may be necessary to use a USB-Ethernet dongle if you plan to connect directly to your computer. 

When connecting to a network every device will be assigned an IP address, this is a unique identifier for each device. If your network contains a router then normally this will automatically assign IP addresses, otherwise, it may be necessary to manually assign IP addresses, particularly if you are connecting directly to your computer. 

For more information on network configuration see the Networking Guide

By default Ubidium will use automatic IP assignment, to manually set the IP address on Ubidium press the third Navigation Button to open the Network Settings, then press the top Navigation button to open the Ethernet Settings.

Set the Method to manual, press the top Navigation Button, and then use the arrow keys to select manual and press OK to confirm.

You can then set the IP address and other network settings by pressing the second Navigation Button to open the Static IP menu, then select the corresponding value you wish to set.